 |
Laboratory Microwave
The SHUR/Wave Laboratory Microwave
is the newest addition to the TBS line of quality instrumentation.
Specifically designed for fixation and processing of tissue
samples, the SHUR/Wave can also be
used for specimen stabilization and hardening, performing
epitope retrieval and accelerating decalcification and
staining. It has numerous built-in safety devices that
protect the operator, specimen and instrument. It is also
extremely user friendly, and even provides prompts that
minimize operator error. The SHUR/Wave
has a Programmable Logic Controller (PLC) that allows
at least 30 programs, each with up to 12 steps, to be
optimized, stored and run. The Proportional, Integral,
Differential (PID) Controller monitors the temperature
and works in conjunction with the PLC to assure that the
production of microwaves is proportioned to maintain the
temperature within your guidelines.
Biopsy specimens can be
fixed in 10 minutes and processed in 15 minutes.
Larger specimens require
only 55 minutes for complete fixation and 48 minutes
to 2 hours for processing, depending on the thickness
of the specimen.
Routine specimens can be
rapidly fixed to provide the necessary protection before
processing or when lymph node detection
is important during gross dissection.
Decalcification of bone
marrow biopsies can be done in as little as 3 to 10
minutes, depending on the choice of solution. Decalcification
time for large specimens can be dramatically reduced
by hours or days.
- Maintain uncompromised morphology and antigenicity
- Save on exposure, use and disposal of reagents
- Obtain superior sectioning characteristics
- Dramatically reduce processing time
- Lower operating costs
|
| |
The SHUR/Wave™ has been tested by a registered independent body to rigorous international quality and safety standards, and has been found to be in compliance with the following regulations and specifications:
 |
UL 61010A |
| CSA 1010-1 |
| CE |
EN/IEC EN61010-1, Safety
EN61000-3-2, Harmonic Distortion
EN55011, Emissions
EN61326, Immunity
EN61000-3-3, Voltage Fluctuation/Flicker |
|
|